Ingredients:
1 x container
1 x knife
Duct tape
Sharp pin
Black paint and a brush
Tinfoil
A pair of scissors
Step 1:
Find a suitable container e.g. a cocoa tin or box. Try to ensure it has a removable lid and that the material it is made from is light proof.
Step 2:
Paint or spray the inside, and if necessary the outside, of the container black. This will prevent light bouncing around inside, ensuring that you get a clear image. Make sure that the lid of your container is light proof and relatively easy to remove and replace.
Step 3:
Cut a rectangular hole half way up the container (approx. 2 cm square)
take care not to cut yourself!
Step 4:
Cut a 2.5 cm square piece of aluminium foil (tinfoil) and smooth it out. Use a pin to create a small hole in the centre of the tinfoil. You can also use a thin sheet of aluminium cut from a drinks can but be careful you don't cut yourself! If you're using aluminium (or even brass) sand around the pinhole making sure there are no rough edges.
Step 5:
Attach the tinfoil (or aluminium sheet) to the container making sure the pinhole is over the rectangular hole you already created.
Step 6:
Make a shutter flap out of card and/or tape that can open and close as you need it. Make sure that it completely covers the pinhole.
Step 7:
In the darkroom (under the red safe light) cut a piece of photographic paper to fit inside your container. Secure it in place with a small piece of tape if necessary. It should stay completely still throughout the exposure. Securely attach/replace the lid of your container and close the shutter.
Step 8:
Take the camera outside and find a suitable subject. Ensure that the camera is stable and can't be moved during the exposure. Open the shutter and expose the paper. Depending on the size of the pinhole and the brightness of the light your exposure can be anything from 30 seconds to 5 minutes. Make an educated guess and use your first image as a guide.
Step 9:
Close the shutter at the end of the exposure time and take the camera back to the darkroom. Carefully remove the paper and place it in the chemicals:
Step 10:
There are two methods for creating a positive from your paper negative:
In the darkroom:
1 x container
1 x knife
Duct tape
Sharp pin
Black paint and a brush
Tinfoil
A pair of scissors
Step 1:
Find a suitable container e.g. a cocoa tin or box. Try to ensure it has a removable lid and that the material it is made from is light proof.
Step 2:
Paint or spray the inside, and if necessary the outside, of the container black. This will prevent light bouncing around inside, ensuring that you get a clear image. Make sure that the lid of your container is light proof and relatively easy to remove and replace.
Step 3:
Cut a rectangular hole half way up the container (approx. 2 cm square)
take care not to cut yourself!
Step 4:
Cut a 2.5 cm square piece of aluminium foil (tinfoil) and smooth it out. Use a pin to create a small hole in the centre of the tinfoil. You can also use a thin sheet of aluminium cut from a drinks can but be careful you don't cut yourself! If you're using aluminium (or even brass) sand around the pinhole making sure there are no rough edges.
Step 5:
Attach the tinfoil (or aluminium sheet) to the container making sure the pinhole is over the rectangular hole you already created.
Step 6:
Make a shutter flap out of card and/or tape that can open and close as you need it. Make sure that it completely covers the pinhole.
Step 7:
In the darkroom (under the red safe light) cut a piece of photographic paper to fit inside your container. Secure it in place with a small piece of tape if necessary. It should stay completely still throughout the exposure. Securely attach/replace the lid of your container and close the shutter.
Step 8:
Take the camera outside and find a suitable subject. Ensure that the camera is stable and can't be moved during the exposure. Open the shutter and expose the paper. Depending on the size of the pinhole and the brightness of the light your exposure can be anything from 30 seconds to 5 minutes. Make an educated guess and use your first image as a guide.
Step 9:
Close the shutter at the end of the exposure time and take the camera back to the darkroom. Carefully remove the paper and place it in the chemicals:
- Developer (1 minute)
- Stop Bath (a few seconds)
- Fixative (approx. 5 minutes)
Step 10:
There are two methods for creating a positive from your paper negative:
In the darkroom: